News

Lug butterfly valve, also known as lug type butterfly valve, is widely adopted in water treatment, HVAC, fire protection and industrial fluid pipelines. Distinct from wafer butterfly valves, the lug butterfly valve features threaded lugs distributed on both sides of the valve body. This special structure supports dead-end service, allowing single-side pipeline disassembly without removing the entire valve. However, many installation failures, sealing leakage and bolt breakage originate from non-standard construction. This article sorts out standardized installation procedures and summarizes frequent mistakes, helping engineers maximize the performance of lug butterfly valves and avoid hidden pipeline risks.

In industrial pipeline procurement, engineers and purchasers frequently encounter the model Z41H-16C Gate Valve, which is one of the most widely used hard-sealed wedge gate valves in domestic and international industrial supporting pipelines. Many novice buyers fail to understand the specific meaning of each letter and number in the model code, resulting in improper type selection, mismatched pressure grade and unsuitable working conditions. 

Swing check valves are indispensable automatic pipeline components, widely used in municipal water supply, sewage treatment, petrochemical, power and industrial fluid systems to prevent medium backflow and protect pipeline equipment. The overall performance, service life and operating stability of swing check valves depend heavily on body material selection. Different materials vary greatly in pressure resistance, corrosion resistance, temperature adaptability and cost. Choosing the right valve body material according to actual working conditions can effectively avoid cracking, rusting, medium leakage and premature failure. This guide focuses on three mainstream materials: cast iron, WCB carbon steel and stainless steel, analyzing their features and applicable scenarios for accurate engineering selection.

Wafer butterfly valves are widely used in municipal water supply, sewage treatment, HVAC systems and general industrial pipelines for fluid cut-off and regulation. As the core sealing component, the valve seat material directly determines the valve’s sealing stability, temperature resistance, corrosion resistance and overall service life. Many on-site leakage and aging failures are caused by mismatched seat materials rather than product quality issues. This professional selection guide systematically introduces five mainstream wafer butterfly valve seat materials, including EPDM, NBR, PTFE, Viton and Silicone, helping engineers select the correct type for different working conditions.

Knife gate valves are essential industrial fluid control equipment, specially designed for slurry, sewage, pulp, mining tailings and other solids-laden media. Unlike conventional gate valves, they feature a thin blade cutting structure that effectively shears fibrous impurities and avoids pipeline blockage. In engineering procurement, selecting between uni-directional and bi-directional sealing knife gate valves is the key to balancing sealing performance, installation efficiency and project cost. This article analyzes their structural differences and provides targeted selection guidance for industrial pipeline systems.

Tilting disc check valves are widely used in municipal water supply, sewage treatment, pumping stations and industrial circulating water systems for backflow prevention and pipeline protection. In actual engineering procurement,swing tilting disc check valve and butterfly tilting disc check valve are the two most common types. Although both belong to the tilting valve series and feature low flow resistance compared with traditional check valves, their mechanical structures, closing principles and applicable working conditions vary greatly. This article analyzes their core differences and provides professional selection guidance for pipeline engineers.

Butterfly valves are the mainstream flow control equipment for municipal water supply, sewage treatment, HVAC and industrial circulating pipelines. According to flange connection structures, they are divided into four mainstream types: wafer butterfly valve, lug butterfly valve, U-type butterfly valve and concentric flanged butterfly valve. Many purchasers confuse their structural features, anti-leakage performance and installation limits, leading to frequent bolt loosening, flange leakage and inconvenient later maintenance. This professional guide compares core pros, cons and applicable scenarios of the four models to help engineers make precise selection for different pipeline projects.

Municipal water supply network operation requires stable, efficient and low-maintenance flow control equipment to ensure continuous water delivery and safe pipe network management. As core pipeline components, ball valves for water are widely adopted in municipal water supply, residential water distribution and water plant pipeline renovation projects.In the recent urban pipeline network upgrade project, we have provided a large number of motorized ball valve and pneumatic ball valve units, greatly improving the automation level and operational stability of urban water supply systems.

High performance butterfly valves have become indispensable fluid control equipment for modern industrial and municipal pipeline systems. Among various specifications, the high performance wafer butterfly valve stands out for its compact structure, low flow resistance and excellent sealing stability. Manufactured with standard CF8 stainless steel material, this SS butterfly valve perfectly solves the corrosion, aging and structural damage problems of ordinary cast iron valves in harsh working conditions, delivering long-lasting and zero-leakage pipeline protection.